Fsck.ext4 Unable To Set Superblock Flags

Dari Bertanya Jadi Mengerti

Fsck.ext4 Unable To Set Superblock Flags. If the device is valid and it really contains an ext4 filesystem (and not swap or ufs or something else), then the superblock is corrupt, and you might try running e2fsck with an alternate superblock: In one of these volumes there was a disk failure, configured hotspare was used.

The following partitions can't be recovered
The following partitions can't be recovered

Then of course looked up backup superblocks: Unable to set superblock flags on /dev/nvme0n1p2 Following an unclean shutdown on an sd card based device, i took the sd card out to fsck the root filesystem.

The following partitions can't be recovered

If the device is valid and it really contains an ext2/ext3/ext4 filesystem (and not swap or ufs or something else), then the superblock is corrupt, and you might try running e2fsck with an alternate superblock: Filesystem still has errors ***** Unexpected incosistiency, run fsck manually after a reboot. If the device is valid and it really contains an ext4 filesystem (and not swap or ufs or something else), then the superblock is corrupt, and you might try running e2fsck with an alternate superblock:

← patty brisben biopatty brisben bio →